Our Formwork Shutter Tape
Rebar, Mesh and Construction Supplies (Pty) Ltd supplies quality shutter tape for formwork
Formwork Shutter tape is a pvc tape used for the sealing of joints in
formwork to prevent grout loss or bleeding of concrete. Roll size 50mm x 30 meters.
About Our Joint Former/Grout Sealant Self-adhesive Polyurethane shuttter sealing foam strip
Joint Former/Grout Sealant is used for prevention of grout loss through but joints in metal or
wooden formwork.
DIRECTIONS FOR USE
Ensure that the sides of the shutter panels are free of dirt, base grit, dust or grease
and oil.
Apply Joint Former/Grout Sealant to the side of the panel by peeling off the release
paper and sticking the self-adhesive side to the panel.
Place the next shutter panel in position firmly against the Joint Former/Grout Sealant
strip to ensure that the foam is compressed.
The correct size to be used depends on the condition of the formwork or type being used:
JOINT FORMER/GROUT SEALANT PRODUCT CODES AND SIZES
Product |
Foam |
Width |
Thickness |
Code |
Colour |
(mm) |
(mm) |
GS5x20 |
Grey |
5 |
20 |
GS10x20 |
Grey |
10 |
20 |
GS15x20 |
Grey |
15 |
20 |
WS5x20 |
White |
5 |
20 |
WS10x20 |
White |
10 |
20 |
WS15x20 |
White |
15 |
20 |
ADVANTAGES OF SHUTTER STRIP
Self-adhesive backing makes our foam seal easy and clean to use.
Supplied in various widths and thicknesses.
Water based acrylic adhesive makes Shutterstrip easy to remove after use.
PHYSICAL PROPERTIES / TECHNICAL DATA
Composition: |
Self-adhesive, open cell Polyurethane foam. |
Colours: |
Grey or White. |
Density Grey: |
22 - 24 kg/m3. |
Density White: |
5mm width = 23 kg/m3 & |
|
10 & 15mm width = 20 kg/m3. |
Roll size: |
10 meters. |